<h1>Fume Extraction Systems for Welding, Soldering & Other Industrial Processes: Quality Matters.</h1>

Industrial welding & soldering shops almost always have good portable fume extractors in place to make sure the harmful chemical fumes, gases & vapors are being removed from the workshop area. A problem, however, is when the portable fume collection systems are not made well and either don’t have enough carbon or a high enough grade of carbon to safely absorb the pollutants being released. And the real problem is that most carbon based fume & gas extractors don’t have a ‘warning system’ that tells you when the carbon has become saturated and blowing polluted air right through without removing the chemical fumes—and that’s dangerous to employees. Why? One of the first problems with lower-quality fume extractors is not having enough carbon. If there isn’t enough carbon, that carbon becomes saturated quickly, which creates the air quality hazard faster and the need for filter replacements. 

 

So what’s the answer to truly clean, safe air in welding & soldering and other similar shops? Have enough (at least 40 lbs) high quality carbon. That’s one reason why an Electrocorp unit is one of the safest and best welding & solder fume extractors to use—there’s plenty of carbon, and the carbon is very high quality and super-absorbent. If you want safety for your employees doing commercial or industrial welding or soldering, you really can’t skimp on the amount or quality of the carbon. You’ll spend more on replacement filters that you need to, and if the carbon isn’t super high quality, it won’t absorb all of the tough chemicals, VOC’s, smoke, fumes & gases—and any pollutants left in the air creates a hazard. So, when it comes to industrial or commercial welding or soldering, fume collection systems with too little or not the best carbon really aren’t a good deal, cost you more in filter replacements than needed, and can create health hazards.

 

Bottom line? Buy a quality fume extractor the first time around and prevent all of these issues. Electrocorp is aware of all of the these issues and consequently made fume extraction systems with plenty of high quality carbon, as well as micro-HEPA filters and pre-filters to ensure that your workshop or welding & soldering stations are safe places for people to work. Electrocorp’s best LD 450, MD 750, and MD 950 fume extractor units all have significant amounts of carbon and the other filters so that you can make a good buying decision no matter which industrial workshop gas & vapor collection unit you choose.

 

Air Purifiers and Cleaners offers a great selection of high quality Electrocorp industrial and commercial welding fume collectors & custom air filtration systems to remove just about any fume, chemical, smoke, VOC, gas or particle you have in your workshop, welding & soldering shop or work site—all at cheap discount pricing with free shipping every day. If you have any questions about gas, vapor, VOC, chemical or particle removal, give our experts a call toll-free at 1-800-701-2513. We’re here to help!

 

Air Purifiers and Cleaners.com
LOW PRICES-FREE SHIPPING-EXPERT STAFF
http://www.airpurifiersandcleaners.com/fume-extractors-collection-systems
1-800-701-2513